OPERATION:
The operator will remove the wheel and backing plate from the machine. This is done with eye bolts to the backing plate. Once the wheel has been removed, it only needs to be handled with the crane. The backing plate will be moved to the cart. Once there, the operator only needs to position the backing plate onto the pilot. This is the same pilot used on the spindle flange and will automatically line up the bolt pattern. Once the backing plate is on the pilot, two bolts are used to hold the backing plate in place. The bolts used are the same size as the ones that hold the backing plate to the spindles. (The tools required are also the same.)

One backing plate can be mounted directly to the change flange. The other to the stage two flange. This makes the set mobile.

The carts come with the necessary hitch to match your hi-lo/tow motor. This also flips up out of the way while not in use.