|
 |
Disc Grinders in Stock
Let us help solve your grinding problems. C&B has many years of experience in producing quality grinding equipment and solving production issues.
- Parts
- Repair
- Trouble shooting
- Process development
- Complete teardown
- Hand scraping
- Part specific tooling
- Installation assistance
- Statistical quality run-offs
- Training on your equipment or on ours
- Local and International travel
- Mechanical/Electrical/Controls Engineering
|
|
Training
C & B can perform disc grinding training for your staff. Our training can pay for itself quickly with:
- Improved quality
- Improved productivity
- Lower costs
- Reduced scrap
Our experienced personnel can perform on the job training on your equipment or ours.
C & B Machinery
12001 Globe Street
Livonia, Michigan 48150 USA
Tel: 734-462-0600
Fax: 734-462-0604
Country code: 001
main@cbmachinery.com
|
| |
|
|
| DOUBLE DISC |
| Stock # |
Machine |
C & B Machinery |
04014
|
|
C & B Machinery 2011 Model
30" Swing Arm, Horizontal Double Disc Grinder. Precision Ball Screw Wheel Feed w/ Servo Control, Auto Dress Cycle, Automatic Lube System, 30 HP Motors, Allen Bradley PLC Control, Variable Speed Spindle Drives, Grind Zone with Air Lift Hood. Rapid Part Changeover; 10-minutes or Less. |
| 08039 |
|
C & B/Giustina R242-30" Thru-Feed This double disc grinder was built new by C & B in 1998 and was grinding 3" diameter inner and outer rotors at 847 PPH. We have recently purchased the machine back so all the Engineering, Spare parts list, Manuals, etc. are all available. "Just like a new machine". The photos shown are of the machine when it was built new however it is still in very good shape. Built to automotive specifications, 60 HP spindle motors, Belt Feed Loader, 460/3/60 Electrics, Modicon 984, Emerson AC Servo Drives, S/N 97149, This machine could be tooled to grind your part in weeks. |
| 06053 |
|
C & B/Giustina R242-30" Rotary Pinion gear Grinder, Automatic Load, Automatic Unload, Control Gaging model 770 gauge, 30 HP Motors, 460/3/60 Electrics, S/N 00014, 2000, Ball screw with servo feeds, automatic dress cycle. This machine could be tooled to grind your part in weeks. |
| 09029 |
|
C & B/Giustina R242-30" Swing Arm (SPECIAL WIDE) Sun Gear grinders with collet chucks, Automatic Load, Automatic Unload, Control Gaging model 770 gauge, 40 HP Motors, 460/3/60 Electrics, Modicon Compact 984-145 PLC controller. Modicon Panelmate 2000 HMI, , Ball Screw with servo feeds, NIO automatic dress cycle, Pump over tank, S/N 94243, 1994. |
11150
&
11151 |
|
C & B/Giustina R242-30 Rotary Horizontal Double Disc
Ser. #96012 & 96014 (1996)
Abrasive OD 30"
Cast Machine Base
Quill Type Spindles, 40 HP Each
Servo Controlled Grinding Feed
Automatic Dress Cycle
Modicon PLC Control
Ergonomic Air-lift Grind Zone Hood |
| 11164 |
 |
C & B/Giustina R242-36 Swing Arm Horizontal Double Disc
Ser. #04101 (2005)
Abrasive OD 36"
Cast Machine Base
Quill Type Spindles, 40 HP Each
Servo Controlled Grinding Feed
Servo Controlled Swing Arm Fixture
Automatic Dress Cycle
Siemens 840D Control
Ergonomic Electric Power Lift Grind Zone Hood |
| Stock # |
Machine |
Besly |
| 01103 |
 |
Besly DH6, Rotary Carrier, Complete machine, Model DH6-30 double horizontal spindle rotary disc grinder, new in 1970, Ser# DH6-30-182 Abrasive O.D.: 30" Usable abrasive thickness: 2" Maximum opening between abrasives: 4", Spindle drive motors: 75 HP-230/460/3/60 Electrics: 460 volt free standing 2 door main enclosure with 115 volt line control circuit Fused disconnect machine mounted main operators push button station.
Equipment includes: Heavy type spline drive with anti-backlash air cylinder, Power operated rapid traverse and push button controlled compensating in-feed units, Power operated radial arm dresser (2) Abrasive steel mounting plates, Coolant through spindles for connection to a central system, Approximate floor space 80" x 146" Approximate weight 19,500# |
| 01104 |
 |
Besly DH6, Rotary Carrier, Complete machine, Model DH6-30 double horizontal spindle disc grinder, new in 1970, Ser# DH6-30-093 Abrasive O.D.: 30" Usable abrasive thickness: 2", Maximum opening between abrasives: 4", Spindle drive motors: 75 HP-230/460/3/60, Electrics: 460 volt free standing 2 door main enclosure with 115 volt line control circuit Fused disconnect machine mounted main operators push button station.
Equipment includes: Heavy type spline drive with anti-backlash air cylinder, Power operated rapid traverse and push button controlled compensating in-feed units, Power operated radial arm dresser (2) Abrasive steel mounting plates, Coolant through spindles for connection to a central system, Approximate floor space 80" x 146", Approximate weight 19,500# |
| 01152 |
|
Besly DH6, Rotary, Besly Model DH6-30 double horizontal spindle disc grinder, new in 1976, Ser# DH6-30-276 (5586), Abrasive O.D.: 30", Usable abrasive thickness: 2", Maximum opening between abrasives: 4", Spindle drive motors: 40 HP-230/460/3/60 Electrics, 460 volt free standing 2 door main enclosure with 115 volt line control circuit Fused disconnect machine mounted main operators push button station. Equipment includes: Heavy type spline drive with anti-backlash air cylinder, Power operated rapid traverse and push button controlled, Compensating infeed units, Power operated radial arm dresser (2) Abrasive steel mounting plates, Coolant through spindles for connection to a central system, Approximate floor space 80" x 146", Approximate weight 19,500# |
| 01153 |
 |
Besly DH6, Rotary, Besly Model DH6-30 double horizontal spindle disc grinder, new in 1976, Ser# DH6-30-277 (5587), Abrasive O.D.: 30" Usable abrasive thickness: 2", Maximum opening between abrasives: 4", Spindle drive motors: 40 HP-230/460/3/60, Electrics 460 volt free standing 2 door main enclosure with 115 volt line control circuit Fused disconnect machine mounted main operators push button station. Equipment includes: Heavy type spline drive with anti-backlash air cylinder, Power operated rapid traverse and push button controlled, compensating infeed units, Power operated radial arm dresser, (2) Abrasive steel mounting plates, Coolant through spindles for connection to a central system, Approximate floor space 80" x 146", Approximate weight 19,500# |
| 01159 |
|
Besly DH6, Long Stroke Pusher, Besly Model DH6-30 horizontal spindle double disc grinder, new in 1976, S# DH6-30-193 (5549), Abrasive O.D.: 30" Usable abrasive thickness: 2", Maximum opening between abrasives, 3" Spindle drive motors, 50 HP-230/460/3/60 Electrics 460 volt free standing 2 door main enclosure with 115 volt line control circuit, Fused disconnect machine mounted main operators push button station. Equipment includes: Heavy type spline drive with anti-backlash air cylinder, Power operated rapid traverse and push button controlled compensating infeed units, Power operated radial arm dresser, (2) Abrasive steel mounting plates, Coolant through spindles for connection to a central system, Besly advanced sealed spindle quill, Approximate floor space 115" x 146", Approximate weight 21,000# |
| 04032 |
 |
Besly DH6, Special Thru Feed, Model 6D 43M.33 double horizontal spindle disc grinder, Ser# ?? Abrasive O.D. 23", Usable abrasive thickness N/A, Maximum opening between abrasives: 4",
Spindle drive motors: (25 HP 208/220/440/3/60), Machine mounted main operator’s push button station.
Equipment includes: Heavy type spline drive with anti-backlash air cylinder, Power operated rapid traverse and push button controlled compensating infeed units, (2) Diamond Abrasive wheels with built in backing plates, Coolant through spindles for connection to a central system. Approximate floor space 114" x 146", Approximate weigh 18,500# |
| 05066 |
|
Besly DH-2-15, Short Stroke Pusher Feed, double horizontal spindle disc grinder, complete machine Ser# DH2-15-77-4018, 1978 Abrasive O.D. 15", Usable abrasive thickness N/A, Maximum opening between abrasives: 20 HP Spindle drive motors, Machine mounted main operator's push button station. Equipment includes: Heavy type spline drive with anti-backlash air cylinder, Power operated rapid traverse and push button controlled compensating infeed units, Hydraulic power operated radial arm dresser, (2) Abrasive wheels with backing plates, Coolant through spindles for connection to a central system. Approximate floor space 114" x 146", Approximate weigh 11,000# ,Prints & Manuals 230/460V |
| 05067 |
|
Besly DH-2-20, Rotary Feed, double horizontal spindle disc grinder, complete machine Ser# DH2-20-0LL-GE 559, 20 Abrasive O.D., Spindle drive motors: (20 HP), Machine mounted main operator's push button station. Equipment includes: Heavy type spline drive with anti-backlash air cylinder, Power operated rapid traverse and push button controlled compensating infeed units, Hand crank operated radial arm dresser, (2) Abrasive wheels with backing plates, Coolant through spindles for connection to a central system. Approximate floor space 114" x 146", Approximate weigh 11,000# ,Prints & Manuals 230/460V |
09100
|
|
Besly DH6-30, Rotary Feed with updated ball screw in-feed, Tooled to finish grind CONNECTING RODS. Double horizontal spindle disc grinder, complete machine Ser# 93213 and 94071, 30" Abrasive O.D., Spindle drive motors: (75 HP), Main operator's station, abrasive backing plates, Approximate floor space 114" x 146", Approximate weigh 11,000# ,Prints & Manuals 230/460V. (Two identical machines are available) |
| Stock # |
Machine |
GARDNER |
| 03141 |
|
Gardner 2HD-30" Thru Feed, 40 HP. spindle motors, 220/440 wired for 440volt, S/N 437-5, 60's |
| 10161 |
 |
Gardner SDG5-30", Rotary Carrier, Horizontal Double Disc Grinder
Ser. #597-5
Abrasive O.D. 30"
Spindle drive motors: (75 HP 230/460 3ph, 60hz) currently wired for 460 volt
Machine mounted main operator's pushbutton station
Power operated rapid traverse and pushbutton controlled compensating infeed units
Electric powered radial arm dresser
Hydraulic powered grind zone hood lift
(2) Abrasive steel mounting plates
Coolant through spindles for connection to a central system
Rotary carrier feed mounted on the front knee
Approximate floor space: 114" x 146", weight 21,500 lbs. |
10200
&
10201 |
 |
Gardner SDG3-30", Rotary, Horizontal Double Disc Grinder
Ser. #870-9 (alternate #870-10 Stock# 10201)
Abrasive O.D. 30"
Spindle drive motors: (40 HP 220/440 3ph, 60hz) currently wired for 440 volt
Machine mounted main operator's pushbutton station
Power operated rapid traverse and pushbutton controlled compensating infeed units
Power operated radial arm dresser
(2) Abrasive steel mounting plates
Coolant through spindles for connection to a central system
Rotary Carrier fixture mounted on the front knee
Approximate floor space: 114" x 146", weight 20,000 lbs.
Trabon grease lube system
Two-door electrical panel with Modicon 484 controller and J474 slave communication
Rear sump tank
Setup stairs
Gauge fixture with gauge heads but no gauge monitor
|
| Stock # |
Machine |
Mattison |
11087
&
11088 |
 |
Mattison Model 223N Rotary Horizontal Double Disc Grinder
Ser. #221-186 & 221-189 (1994)
Abrasive OD 23"
Hydrostatic Spindles, 20 HP Each
Servo Controlled Grinding Feed
Independent Automatic Dresser Arms
Automatic Gaging
Allen Bradley 9 Series Control |
| Vertical Grinders |
| 99044 |
 |
C & B - Besly V-6000, 30" wheel, Remanufactured with Ball Screws, Servo Motor, Touch Screen Operator Station, NC controlled, 6 Fixtures, Warranty, S/N 30042, 2008 model |
08103
|
|
C & B - Besly V-6000, 30" wheel, USED This machine was remanufactured / built new by in 1999 by C & B. Ball Screws, Servo Motor, Touch Screen Operator Station, NC controlled, 6 Fixtures, S/N 99038, 1999 model, coolant system also available.
This machine will come with Engineering, Spare parts list, Manuals, etc. "just like a new machine". The photo shown is from when the machine was built however it is still in very good shape. |
| 11044 |
 |
Besley SV2-23 Single Disc Rotary
Serial #SV2-23-012
23" Abrasive
20 HP Grinding wheel spindle motor
Pushbutton micro infeed
Pushbutton rapid traverse
Heavy Duty quill type spindle assembly
23" Rotary Table
Trabon Auto lube system
Manual Radial arm dresser |
| 11045 |
 |
Besley SV2-23 Single Disc Rotary
Serial #SV2-23-011
23" Abrasive
20 HP Grinding wheel spindle motor
Pushbutton micro infeed
Pushbutton rapid traverse
Heavy Duty quill type spindle assembly
23" Rotary Table
Trabon Auto lube system
Powered Radial arm dresser |
| 98171 |
 |
Blanchard 18A2, Double Head, Partially rebuilt, 18" Wheels, 46" Table S/N 13435, Year 1971 |
| 01150 |
 |
Mattison 24A2, Fixture Chuck for Thrust Face Connecting Rods, S/N 24A2- 261, , Automatic Unload (Tip Trays), 30 HP Motors, Variable Speed Drive. Part remanufactured with ball screws and servo on the infeed. |
| 00173 |
 |
Mattison 72C4, 4 head, 72" center column, 20" Wheels, S/N 127 |
98175
|
|
Mattison Model 24, 100 HP, 700 RPM single head, 42" Table, 24" Wheel, Remanufactured with new GE Fanuc Power Mate controls, Ball Screw on wheel head with Fanuc servo controller, Danfuss variable speed drive on 10 HP table, Magna–Flux magnetic chuck control, manual dresser, Coolant system with magnet separator. 480 volt, Warranty |
TOP
|
 |
|
|
