|
|
|
Double Disc
Re-Manufactured or Re-built |
|
|
|
04015 |
|
2008 Model SEE ADDTIONAL INFORMATION |
MI |
$ 260,000 |
|
02030 |
|
2003 Model C & B / Besly DH6-30, Swing Arm, Horizontal Re-Manufactured Double Disc Grinder with 21CSS package, Precision Ball Screw
updates for Spindle Feed, Servo Motors/Drives, 3.5 Minute Auto Dress Cycle,
Servo Controller, Automatic Lube System, 20 HP Motors, User friendly Touch Screen Controls
(Allen-Bradley 900 PanelView),
Operator station is mounted on a Strong Arm adjustable pendant, single door electrical panel
with Allen-Bradley SLC 5/03
controller, 1394 Digital Servo drives with built-in motion control, Variable
speed spindle drives, Grind Zone with Air Lift Hood
(aluminum), Tooled for a Swing Arm or can
be supplied with a Rotary Carrier fixture. Remanufactured with |
MI |
$ 220,000 |
|
03184 |
Besly DH6, Thru Feed, Model DH6-30 double horizontal spindle disc
grinder, Rebuilt
with Warranty, All new wiring and Electrical Panel, Abrasive
O.D.: 30” Useable abrasive
thickness: 2”, Maximum opening between abrasives: 4”.
Spindle drive motors: (NEW 50HP 230/460/3/60), Machine mounted main
operators push button station. Equipment includes: Heavy type spline drive
with anti-backlash air cylinder, Power operated rapid traverse and push
button controlled compensating infeed units, Power operated radial arm
dresser (2) Abrasive steel mounting plates, Coolant through spindles for
connection to a central system. Approximate floor space: 114” x
146”, Approximate weight:
19,500#, SN# DH6-30-202 This machine is a complete rebuild back to OEM NEW condition. All new wiring and Electrical Panel This machine is still in the process of being rebuilt and will be
completed April of 2008. |
MI |
$198,000 |
|
|
|
|
Vertical Disc Re-Manufactured or Re-built |
|
|
|
99044 |
|
C & B - Besly V-6000, 30” wheel, Remanufactured with Ball Screws,
Servo Motor, Touch Screen Operator Station, NC controled, 6 Fixtures, Warranty, S/N 30042, 2008
model |
MI |
$ 265,000 |
|
|
|
Giustina - Double Disc
Horizontal (Oscillating or Swing Arm styles
upon request) |
|
|
|
08039 |
|
C & B/Giustina R242-30” Thru-Feed This double disc grinder
was built new by C & B in 1998 and was grinding 3” diameter inner
and outer rotors at 847 PPH. We have
recently purchased the machine back so all the Engineering, Spare parts list,
Manuals, etc. are all available. “Just like a new machine”. The photos shown are of the machine when it
was built new however it is still in very good shape. Built to automotive specifications, 60Hp
spindle motors, Belt Feed Loader,
460/3/60 Electrics, Modicon 984, Emerson AC Servo Drives, S/N 97149, This
machine could be tooled to grind your part in weeks. |
MI |
$ 140,000 as-is, under power, not tooled Dan W. said 80 IPM feed .010” per
pass in Inconel, Stainless. Kerry- 1”x4” long steel = 22 to 26 parts
a minute. |
|
|
|
|
|
|
|
06053 |
|
C & B/Giustina R242-30”
Rotary Pinion
gear Grinders, Automatic Load, Automatic Unload, Control Gaging model 770
gauge, 30HP Motors, 460/3/60 Electrics, S/N 00014, 2000, This machine could
be tooled to grind your part in weeks. |
MI |
$235,000 |
|
|
|
C & B - Double Disc
Horizontal NEW
MACHINES (Oscillating or Swing Arm styles
upon request) |
|
|
|
07136 |
|
C & B DG-2-H 30” double disc grinder Rotary or Swing Arm, New
machine being built and waiting for production application SEE ADDTIONAL INFORMATION |
MI |
TBD |
|
|
|
|
|
|
|
|
|
BESLY - Single Disc Horizontal (Oscillating or Swing Arm styles
upon request) |
|
|
|
95024 |
|
Besly SH6-23 Single
Head, Top Clamp, S/N 011, , 20 HP, Auto Dress, Trabon Lube, Micro Infeed, Jog
rev on carrier, Sheffield Wheel Positioner, Missing Head. |
MI |
|
|
95076 |
|
Besly SH6-23 Single
Head, S/N SH6-23-012 (SSG52229), 230/460/3/60, Missing Head, Missing |
MI |
|
|
|
|
BESLY - Double Disc Horizontal (Oscillating or Swing Arm styles
upon request) |
|
|
|
01103 |
|
Besly DH6, Rotary Carrier, Complete machine, Model DH6-30 double
horizontal spindle rotary disc grinder, new in 1970, Ser# DH6-30-182 Abrasive
O.D.: 30” Useable abrasive
thickness: 2” Maximum opening between abrasives: 4”, Spindle
drive motors: 75HP-230/460/3/60 Electrics: 460 volt free standing 2 door
main enclosure with 115 volt line control circuit Fused disconnect machine
mounted main operators push button station. Equipment includes: Heavy type spline drive with anti-backlash air
cylinder, Power operated rapid traverse and push button controlled
compensating in-feed units, Power operated radial arm dresser (2) Abrasive
steel mounting plates, Coolant through spindles for connection to a central
system, Approximate floor space 80” x 146” Approximate weight 19,500# |
MI-L |
$ 62,500 |
|
01104 |
|
Besly DH6, Rotary Carrier, Complete machine, Model DH6-30 double
horizontal spindle disc grinder, new in 1970, Ser# DH6-30-093 Abrasive
O.D.: 30” Useable abrasive
thickness: 2”, Maximum opening
between abrasives: 4”, Spindle drive
motors: 75HP-230/460/3/60, Electrics: 460 volt free standing 2 door main
enclosure with 115 volt line control circuit Fused disconnect machine mounted
main operators push button station. Equipment includes: Heavy type spline drive with anti-backlash air
cylinder, Power operated rapid traverse and push button controlled
compensating in-feed units, Power operated radial arm dresser (2) Abrasive
steel mounting plates, Coolant through spindles for connection to a central
system, Approximate floor space
80” x 146”, Approximate weight 19,500# |
MI-L |
$ 62,500 |
|
01152 |
|
Besly DH6, Rotary, Besly Model DH6-30 double horizontal spindle
disc grinder, new in 1976, Ser# DH6-30-276 (5586), Abrasive
O.D.: 30”, Useable abrasive thickness: 2”, Maximum opening
between abrasives: 4”, Spindle drive
motors: 40HP-230/460/3/60 Electrics, 460 volt free standing 2 door main
enclosure with 115 volt line control circuit Fused disconnect machine mounted
main operators push button station. Equipment includes: Heavy type spline
drive with anti-backlash air cylinder, Power operated rapid traverse and push
button controlled, Compensating infeed units, Power operated radial arm
dresser (2) Abrasive steel mounting plates, Coolant through spindles for
connection to a central system, Approximate floor space 80” x
146”, Approximate
weight 19,500# |
CT |
$ 62,500 |
|
01153 |
|
Besly DH6, Rotary, Besly Model DH6-30 double horizontal spindle
disc grinder, new in 1976, Ser# DH6-30-277 (5587), Abrasive
O.D.: 30” Useable abrasive thickness: 2”, Maximum
opening between abrasives: 4”, Spindle drive motors: 40HP-230/460/3/60,
Electrics 460 volt free standing 2 door main enclosure with 115 volt line
control circuit Fused disconnect machine mounted main operators push button
station. Equipment includes: Heavy type spline drive with anti-backlash air
cylinder, Power operated rapid traverse and push button controlled,
compensating infeed units, Power operated radial arm dresser, (2) Abrasive
steel mounting plates, Coolant through spindles for connection to a central
system, Approximate floor space 80” x 146”, Approximate weight
19,500# |
CT |
$ 62,500 |
|
01159 |
|
Besly DH6, Long Stroke Pusher,
Besly Model DH6-30 horizontal spindle double disc grinder, new in
1976, S# DH6-30-193 (5549), Abrasive O.D.: 30” Useable abrasive thickness: 2”,
Maximum opening between abrasives, 3” Spindle drive motors,
50HP-230/460/3/60 Electrics 460 volt free standing 2 door main enclosure with
115 volt line control circuit, Fused disconnect machine mounted main
operators push button station. Equipment includes: Heavy type spline drive
with anti-backlash air cylinder, Power
operated rapid traverse and push button controlled compensating infeed units,
Power operated radial arm dresser, (2) Abrasive steel mounting plates,
Coolant through spindles for connection to a central system, Besly advanced
sealed spindle quill, Approximate
floor space 115” x 146”,
Approximate weight 21,000# |
CT |
$ 59,800 |
|
03140 |
|
Besly DH6, was Swing Arm, (no front end) Model DH6-30 double horizontal
spindle disc grinder, Ser# DH6-30-303, Abrasive O.D. 30”, Useable
abrasive thickness: 2”, Maximum opening between
abrasives: 4”, Spindle drive motors: (est. 40HP
230/460/3/60), New 2 door electrical panel is needed, Operators push button
station. Equipment includes: Heavy type spline drive with anti-backlash air
cylinder, Hydraulic power operated rapid traverse and push button controlled
compensating infeed units, Hydraulic Power operated radial arm dresser (2)
Abrasive steel mounting plates, Coolant through spindles for connection to a
central system, Approximate floor
space 80” x 146”,
Approximate weight 19,500# |
MI |
$ 47,800 |
|
04014 |
|
Besly DH6, Swing Arm, Model DH6-30 double horizontal spindle disc
grinder, Ser# DH6-30-283, Abrasive O.D. 30”, Useable abrasive thickness 2”,
Maximum opening between abrasives 4”, Spindle drive
motors: (est. 60HP 230/460/3/60), Machine mounted main operators push
button station. Equipment includes: Heavy type spline drive with anti-backlash air
cylinder, Power operated rapid traverse and push button controlled
compensating infeed units, Power operated radial arm dresser (2) Abrasive
steel mounting plates, Coolant through spindles for connection to a central
system. Approximate floor space 114” x 146”, Approximate weight
19,500# |
MI |
$ 34,900 |
|
04032 |
|
Besly DH6, Special Thru Feed, Model 6D 43M.33 double horizontal spindle disc grinder,
Ser# ?? Abrasive O.D. 23”,
Useable abrasive thickness N/A, Maximum opening between
abrasives: 4”, Spindle drive motors: (25HP 208/220/440/3/60), Machine mounted
main operator’s push button station. Equipment includes: Heavy type spline drive with anti-backlash air
cylinder, Power operated rapid traverse and push button controlled
compensating infeed units, (2) Diamond Abrasive wheels with built in backing
plates, Coolant through spindles for connection to a central system. Approximate floor space 114” x
146”, Approximate
weigh 18,500# |
MI |
$ 42,650 |
|
05044 |
|
Besly / Warner Swasey H7000-23”, Long Stroke Pusher Feed, horizontal spindle double disc
grinder, Ser# 04-030963, Abrasive O.D. 23”, Spindle drive motors: (20HP), Coolant
through spindles for connection to a central system, Power operated radial arm dresser , Stand
Alone Electrical Panel, Console, Approximate Dimensions: 14' L x 8' W x 6' H, Approximate Weight: 20,000
Lbs., Approximate Dimensions Of Electrical Panel: 18' L x 8' W x 2' H,
Approximate Weight Of Electrical Panel: 3,500 Lbs. , Approximate Dimensions
Of Floor Mounted Push Button Control Panel: 3' L x 3' W x 5' H, Approximate
Weight Of Control Panel: 300 Lbs. Machine mounted main operator’s push
button station. Additional Machine
Information: The machines serial number does indicate a 23" wheel
machine, however the grind zone measures enough clearance for 30"
wheels. This machine was custom built for GM for a particular job and
we suspect the base is the standard 30" The machine is equipped with
23" diameter superabrasive CBN wheels that are trued with a powered diamond
roll cutter and then sharpened with an abrasive jet, (sand blaster). The
machine was equipped with a servo controlled Long Stoke Pusher Feeder
"LSPF" (Which is missing). This directs one part at a time
across the face of the grinding wheels. The parts are loaded, one at a
time into a workholder by a pneumatic load cylinder. The
workholder travels between the grinding wheel wheels and the part is ejected
at the rear of the machine by a pneumatic unload cylinder. After
ejection from the machine, the part rolls down the exit chute where the
customer's automation then took over. The machine has the
same guides and guide adjusters as a thru-feed grinder but would need the
belt feeder unit plus the top and bottom guides. This machine also
has auxiliary DC spindle drive motors that rotate the grinding wheels at
a slower speed during the sharpening and truing sequences. The machine is controlled by an
Allen Bradley PLC 2/30 programmable controller. The machine is able to
grind one piece at a time in the "Setup Cycle mode, or provide fully
automatic continuous operation when placed into "Run Cycle" mode. The plasma display on the
operator station is missing and would need to be replaced. It appears that
all other electrical components are in tack. It also appears that all the
electrical drawings are with the machine. We also have the complete
operating, setup, maintenance manual plus floorplan and tooling
prints. |
MI |
$ 48,800 |
|
05066 |
Besly DH-2-15,Short Stroke Pusher Feed, double
horizontal spindle disc grinder, complete machine Ser# DH2-15-77-4018, 1978
Abrasive O.D. 15”, Useable
abrasive thickness N/A, Maximum opening between abrasives: 20 Hp Spindle
drive motors, Machine mounted main operator’s push button station. Equipment
includes: Heavy type spline drive with anti-backlash air cylinder, Power
operated rapid traverse and push button controlled compensating infeed units,
Hydraulic power operated radial arm dresser, (2) Abrasive wheels with backing
plates, Coolant through spindles for connection to a central system. Approximate floor space 114” x
146”, Approximate
weigh 11,000# ,Prints & Manuals 230/460V |
|
$ 44,900 |
|
|
05067 |
|
Besly DH-2-20,Rotary Feed, double horizontal spindle disc grinder,
complete machine Ser# DH2-20-0LL-GE 559, 20 Abrasive O.D., Spindle drive
motors: (20HP), Machine mounted main operator’s push button
station. Equipment includes: Heavy type spline drive with anti-backlash air
cylinder, Power operated rapid traverse and push button controlled
compensating infeed units, Hand crank operated radial arm dresser, (2)
Abrasive wheels with backing plates, Coolant through spindles for connection
to a central system. Approximate floor
space 114” x 146”,
Approximate weigh 11,000# ,Prints
& Manuals 230/460V |
|
$ 44,900 |
|
|
|
(Oscillating or Swing Arm styles
upon request) |
|
|
|
93204 |
|
Gardner SDG5-33 Rotary Disc Brake Rotor Grinders, Automatic Load,
Automatic Unload, Hydraulic Headstock, Hydraulic Tailstock, 40 HP Motors,
460/3/60 Electrics, S/N 830-5, 1980, Machine has been under power and
grinding rotors at C & B Machinery.
Currently we need to build a new electric panel for it. |
MI |
$ 59,900 |
|
SOLD |
|
Gardner SDG6-30
Thru Feed, 40Hp. Re-conditioned with New
Operator Station, ready to grind. S/N
888.3 year 1982 (9’H x 11W x 10L 25,000 lbs) |
MI |
SOLD |
|
03141 |
|
|
MI |
$ 32,450 |
|
|
|
Vertical Disc |
|
|
|
02157 SOLD |
|
Besly V7000
Vertical Single head, 36”
wheel, 50” table, missing Hand wheel for head, SN 80-4018 (9’6”H x 6-1/2W x 11L 25,000
lbs) |
MI |
|
|
02158 |
|
Besly V7000
Vertical Single head, 36” wheel, missing Table SN 80-4019 (9’6”H x 6-1/2W x 11L 25,000
lbs) |
MI |
$ 32,800 |
|
02156 |
|
Besly V6000 Vertical
Single head, missing Head / cross shaft, servo, top cover & 4 fixtures,
40” table, 30” Wheels
SN 80-4046 (9’H x 6W
x 9L 18,000 lbs) |
MI |
$ 45,700 |
|
|
|
Surface, Rotary Type (Planetary) |
|
|
|
91124 |
|
Mattison No. 24AP Planetary, New in 1974 S/N
24A2-202, with 2 Orbital Grinding Heads, Plain Table, Four (4) Work Locating
Areas. Work Cycle-Load Work, Index
Table, Feed Grinding Heads Down, Rough and Finish Grind, Auto Raise Heads,
Index Table. Table Diameter 48",
Grinding Heads 15 HP, 3/60/230/460 - 1200 RPM, Trabon Pressure Lube, No
Electric Control Panel. This Mattison two (2) head
Planetary has tremendous capabilities for close tolerances on size, flatness
and parallelism |
MI |
$ 37,500 |
|
|
|
Surface, Rotary Type (Vertical
Spindle) |
|
|
|
98171 |
|
Blanchard 18A2,
Double Head, Partially rebuilt, 18” Wheels, 46” Table S/N
13435, Year 1971 |
MI |
$ 44,200 |
|
01150 |
|
Mattison 24A2 Fixture Chuck for Thrust Face
Connecting Rods, S/N 24A2- 261, , Automatic Unload (Tip Trays), 30 HP Motors,
|
MI |
$ 54,900 |
|
00173 |
|
Mattison 72C4, 4 head, 72” center column,
20” Wheels, S/N 127 |
MI |
$ 46,750 |
|
98175 |
|
Mattison Model 24, 100 Hp, 700 RPM single
head, 42” Table, 24”
Wheel, Remanufactured with new GE
Fanuc Power Mate controls, Ball Screw on wheel head with Fanuc servo controller,
Danfuss variable speed drive on 10Hp table, Magna–Flux magnetic chuck
control, manual dresser, Coolant system with magnet separator. 480 volt, Warranty |
MI |
$ 149,000 |
|
03080 |
|
New Brittain Grinder Model
800-8-3,
Vertical Spindle, 22,500 Lbs. S/N
40271 There are (4) four vertical
spindles. 8” Wheels, The table
has (8) eight fixtures set in pairs at 90 degrees location on the table. It looks as
if this was tooled to grind the top surface of a rotating part. |
MI |
$ 18,900 |
